Home  My Account  View Cart
 

Categories

Bestsellers

Site Information

Newsletter Signup

Submit your e-mail address to receive free updates and promotions.
 
Home » LOADING RAMPS (Aluminum)

LOADING RAMPS (Aluminum)

IMPORTANT CONSIDERATIONS WHEN ORDERING LOADING RAMPS: Where are you going to store the ramps? If your trailer has a place to store the ramps under the deck, you need to make some careful measurements of the inside dimensions of this receiver box. Slight distortions in the frame of this internal storage frame can cause binding. For instance, impact with a sidewalk curb with sufficient force can deform the receiver frame just enough to cause binding with longer ramp lengths. (If you only have a quarter inch of room on either side of the ramp, as you slide an eight foot ramp into a deformed box, it isn't hard to run out of space at these close tolerances) If you have a damaged receiver box, you may need to repair it. Call 866-855-4285 for more information.

NEW! Shipping is now FREE on most loading ramps!

 

Subcategories - find our complete assortment here!

Our Most Popular Products in This Category

Page 1 of 3
Sort By:
Boydstun Ramps (Pair of 104" x 19" ramps with roller) Shipping included
SKU: WDR-05-19-104-12
Boydstun Ramps (Pair of 104" x 19" ramps with roller) Shipping included 
One pair of Boydstun Style Ramps with Roller end.
104" Long, 19" wide. Max capacity 5,000lbs. Weighs 66lbs each.
Special order only!
Ships from WI
$1249.00
Call to order


60" Layover Ramp Extenders (Pair of 60"L x15"W x2" Thick)- Shipping Included
SKU: WDR05-15-060-00-LAYOVER
60" Layover Ramp Extenders (Pair of 60"L x15"W x2" Thick)- Shipping Included 
Layover ramps to extend your existing ramps.
Ships from WI
$425.00 $345.00


72 inch Loading Ramps (Pair of 72"L x 12"W x 2 1/4" Thick) - Shipping Included
SKU: WDR02-12-072-046-S
72 inch Loading Ramps (Pair of 72"L x 12"W x 2 1/4" Thick) - Shipping Included 
Pair of aluminum ramps, 72" long x 12" wide and 2 1/4 inches thick with hook top end and stub toe foot. Weighs 19 lb each. 2000 lb per axle capacity. Load height 12"-16".
Ships from WI
$299.95
Call to order


90 inch Loading Ramps (Pair of 90"L x14"W x 4 1/4" Thick) - Shipping Included
SKU: WDR-10-14-090-02-S
90 inch Loading Ramps (Pair of 90"L x14"W x 4 1/4" Thick) - Shipping Included 
Pair of straight ramps w/pin ends, 7.5 foot length 14 inch width, 4.25 inch thickness. Weighs 47 lb each. 10,000 lb per axle capacity. For load height-24"-36" Pin/Eye Ends Knife edge end comes with stub toe to prevent curling. (see additional product picture)
Ships from WI
$644.95


60 Inch loading ramps (Pair of 60"L x15"W x2" Thick) - Shipping Included
SKU: WDR05-15-060-04-S
60 Inch loading ramps (Pair of 60"L x15"W x2" Thick) - Shipping Included 
Pair of ramps with hook ends, 60 in length, 15 in width, 2 inch thickness, weighs 26 lb each, 5000 lb capacity per axle, 8500 lb capacity per vehicle, load height-16"-24"
Works on Cottrells
Ships from WI
$379.99
Call to order


94 inch Low Profile Loading Ramp (Pair of 94"L x15"W x2 3/4" Thick) - Shipping Included
SKU: WDR05-15-094-04-LP
94 inch Low Profile Loading Ramp (Pair of 94"L x15"W x2 3/4" Thick) - Shipping Included 
Pair of low profile aluminum ramps, 94" long x 15" wide and 2 3/4 inches thick with hook top end and knife foot. Weighs 39 lb each. 5000 lb per axle capacity. Load height 16"-24".
Ships from WI
$699.95 $599.95


94 inch loading ramps (Pair of 94"L x15"W x3 1/4" Thick) - Shipping Included
SKU: WDR05-15-094-04
94 inch loading ramps (Pair of 94"L x15"W x3 1/4" Thick) - Shipping Included 
Pair of straight ramps with hook ends, 94 in length, 15 in width, 3.25 inch thickness, weighs 35 lb each, 5000 lb capacity per axle, 8500 lb capacity per vehicle, load height-16"-24"
Ships from WI
$499.99


94.5 inch loading ramp (Pair of 94.5"L x18"W x2 1/4" Thick) - Shipping Included
SKU: WDR04-18-094-01-01
94.5 inch loading ramp (Pair of 94.5"L x18"W x2 1/4" Thick) - Shipping Included 
Pair of aluminum ramps, 94.5" long x 18" wide and 2 1/4 inches thick with pin ends on both ends. 4000 lb per axle capacity. Weighs 50 lb each.
Ships from WI
$694.95


96 inch Low Profile Loading Ramp (Pair of 96"L x18"W x2 1/4" Thick) - Shipping Included
SKU: WDR05-18-096-04-S
96 inch Low Profile Loading Ramp (Pair of 96"L x18"W x2 1/4" Thick) - Shipping Included 
Pair of low profile aluminum ramps, 96" long x 18" wide and 2 1/4 inches thick with hook top end and semi stub foot. Weighs 52 lb each. Load height 14"-22". 5000 lb per axle capacity.
Ships from WI
$749.95 $669.95


Modular Car Loading Ramp Kit for Flatbed Trailer
SKU: WDR-04-18-189-01-01-M
Modular Car Loading Ramp Kit for Flatbed Trailer  
(4) 94.5" x 18" aluminum car loading ramps with pin-on ends (1) Lower Ramp Support Stand-Adjustable (22" - 28") Made to work with trailer decks up to 40" off the ground.
Ships from WI
$1395.00
Call to order


10' Loading Ramps (pair) w Pin End and Knife foot
SKU: WDR-05-16-120-01
10' Loading Ramps (pair) w Pin End and Knife foot 
One pair of 10' long x 16" wide and 4.25"' thick Loading Ramps. 5000lbs capacity per axle.Pin End Knife foot. 20"-36" recommended loading height. Ships by truck, call for shipping quote.
Ships from WI
$599.00
Call to order


10' Loading Ramps (pair) w Hook Top
SKU: WDR-05-16-120-04
10' Loading Ramps (pair) w Hook Top 
One pair of 10' long x 16" wide and 4.25"' thick Loading Ramps. 5000lbs capacity per axle. Knife foot. 20"-36" recommended loading height. Ships by truck, call for shipping quote.
Ships from WI
$595.00
Call to order


Page 1 of 3
 

Cart Contents

Your cart is currently empty
Subtotal: $0.00
View Cart

Login

Username:
Password:
 
 

Sale Item

Interactive Catalogs

Links

Valid XHTML 1.0 Transitional