Box contains small, medium and large snap button inserts for the Lifesaver Trucker's Height Stick.
Please note: these snap button inserts only fit the Lifesaver Trucker's Height Stick. Will not work with other brands.
Instructions: (we recommend replacing all three buttons at the same time, even if only one is broken) (Call us if you have any questions or problems!)
Start by removing the folding arm, and leave wing screw off.
Then remove the rubber cup/foot of height stick, and let the inside tubes slide out.
with the first snap button exposed, push in both tabs holding the snap button piece in place, and pull out the whole black piece.
Repeat dropping the inside tube out to expose the next snap button, and repeat removal procedure.
Repeat exposing the third snap button, and remove it.
Now reverse the procedure, by installing the smallest snap button first, and be careful to not bend the tabs too much, and make sure they are seated in the small holes, and that the snap button is moving freely.
When the smallest button has been installed, push the tube back into the next size tube, and repeat snap button installation.
Repeat this for the next size tube, then put the rubber cup/foot back on.
Last, put the arm back on the height stick, and you are good to go!
Here is a video of Steve repairing the height stick-- wait a few seconds... it will come on!
5/5. Product was easy to replace and the money it saved from purchasing a new pole was a big bonus. Sales staff( Gunnar) was a big help. Keep up the great work
Reviewer:Lighthouse Truck Escort
I rated it 4 out of 5 because there are no instructions included, which could be quite helpful - would have saved me some time and aggravation. With a bit of thought, I discovered that the pole must be taken apart by starting at the bottom (i.e. slide section 2 through the bottom of section 3; section 1 though the bottom of section 2....) Otherwise, parts were easy to install. If the replacements last as long as the original ones, we'll be in great shape.
Great review for improving the replacement kit!
Usually we try to explain over the phone, on how to do it.
Nevertheless, it makes total sense having some kind of instructions.
We will work on something we can add to the product listing.
/The AutoHaulerSupply Team!