Two Gallon of Firmfoot Shipstone Gray Non-Skid Epoxy Paint w/ True American Grit
FIRMFOOT® is an epoxy ester coating with grit, specifically designed for foot traffic on most properly prepared substrates, such as steel, fiberglass, treated aluminum, concrete, and wood.
|Ships From:||Dallas, TX|
A single component high-performance epoxy with a special grit incorporated for enhanced slip resistance. Ideal for walkways, boats, trucks, trailers, steps, and ramps where a non-skid surface is desired for added safety.
This is a water-based paint. DO NOT FREEZE! Shelf life at 73 degrees fahrenheit = minimum of 12 months.
- Quick Dry
- Water Based
- Anti-Slip Properties
- Single Component Epoxy
- Easy to Apply
- Manufactured in the USA
Coverage: 481-625 square feet per gallon
Dry to Handle: 45 min - 1 hour
Recoat: 1-2 hours
Steel: Clean thoroughly; use a primer if you want rust resistance
Aluminum: Acid etch preparation
Concrete: Clean with firm bristle brush and Trisodium Phosphate (TSP); let dry thoroughly
Wood: Clean and dry no primer necessary
Stir thoroughly before and occasionally during use.
Product packaged ready to apply. If needed thin up to 10% maximum with water.
The product can be applied by Brush and Roll